Epson Stylus Photo 2200 Ink Jet Printer Guía de inicio rápido

Busca en linea o descarga Guía de inicio rápido para Impresoras De Gran Formato Epson Stylus Photo 2200 Ink Jet Printer. Epson Stylus Photo 2200 Ink Jet Printer Start Here Card Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 6
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
1 Remove everything from the box.
Start
Here
EPSON Stylus
®
Photo 2200
1
1
Unpack
Unpack
Start
Here
2
Put On the
Paper Support
Put On the
Paper Support
Insert the paper support into its slots behind
the sheet feeder.
(To install the roll paper holders, and
automatic roll paper cutter and basket,
see your Printer Basics book.)
Paper support slots
3
Connect the Printer
Connect the Printer
2
Printer connection cables are not included with your printer. You need only one of the
following cables:
USB cable, or
Parallel cable (PC only), or
IEEE-1394 or FireWire™ cable.
USB Cable Users
1 Shut down your computer. In Windows
®
, click Start and select your Shut Down
or Tu rn Off option.
Leave your computer turned off until section 7.
2 Plug the square end of the cable into your printer’s USB port until it stops.
3 Plug the flat end of the cable into your computer’s USB port until it stops.
(You can use any open USB port.)
4 Now plug in and turn on your printer, as described in section 4.
3
Parallel Cable Users (PC only)
1 Shut down your computer. Click Start and select your Shut Down or Turn Off option.
Leave your computer turned off until section 7.
2 Plug the end of the cable with the slotted connector into your printer’s parallel port, then
secure it with the wire clips.
3 Plug the end of the cable with the screws on the side into your computer’s parallel port
and secure it.
4 Now plug in and turn on your printer, as described in section 4.
IEEE-1394 or FireWire Cable Users
1 Shut down your computer. In Windows, click Start and select your Shut Down
or Tu rn Off option.
Leave your computer turned off until section 7.
2 Plug one end of the cable into the printer’s IEEE1394 port.
3 Plug the other end of the cable into your computer’s IEEE-1394 port.
4 Now plug in and turn on your printer, as described in section 4.
Paper support
Ink cartridges
Roll paper holders
Cleaning pad
Power cord
Printer
Basket for
cut photos
Automatic roll
paper cutter
4
Turn On the Printer
Turn On the Printer
4
Turn over
2 Remove all the blue tape and packing materials inside and around the printer.
Cleaning sheets
Power button
Square end
Flat end
Slotted end
End with Screws
AC inlet
1 Connect the power cord that came with your printer to the printer’s
AC inlet.
2 Plug the other end of the power cord into a grounded electrical outlet.
3 Press and release the power button to turn it on.
CAUTION: Never use an external switch, such as a wall switch or power strip
switch, to turn the printer on or off.
CPD13852R2_Ellice_SH_E.qx 10/1/03 1:56 PM Page 1
Vista de pagina 0
1 2 3 4 5 6

Indice de contenidos

Pagina 1 - Turn over

1 Remove everything from the box.Start HereEPSON Stylus®Photo 220011UnpackUnpackStart Here2Put On the Paper SupportPut On the Paper SupportInsert the

Pagina 2

1 Remove everything from the box.Start HereEPSON Stylus®Photo 220011UnpackUnpackStart Here2Put On the Paper SupportPut On the Paper SupportInsert the

Pagina 3

1 Remove everything from the box.Start HereEPSON Stylus®Photo 220011UnpackUnpackStart Here2Put On the Paper SupportPut On the Paper SupportInsert the

Pagina 4 - Macintosh

PrintPrint61 Open the output tray, the printer cover, and the cartridge cover.2 Shake each unopened cartridge up and down 4 or 5 times. Then remove th

Pagina 5

PrintPrint61 Open the output tray, the printer cover, and the cartridge cover.2 Shake each unopened cartridge up and down 4 or 5 times. Then remove th

Pagina 6

PrintPrint61 Open the output tray, the printer cover, and the cartridge cover.2 Shake each unopened cartridge up and down 4 or 5 times. Then remove th

Comentarios a estos manuales

Sin comentarios