Epson 1925W - POWERLITE Multimedia Projector Guía de usuario descargar pdf (Pagina 54)

PowerLite 1915/1925W

9. Select your IP Settings as necessary:

• If your network assigns addresses automatically, turn on the DHCP setting.

• If you must set addresses manually, turn off DHCP and enter the projector's IP Address, Subnet

Mask, and Gateway Address as needed.

Note: To highlight the numbers you want from the displayed keyboard, press the arrow buttons on

the remote control. To select a highlighted number, press Enter.

10. To prevent display of the IP address on the standby screen, turn off IP Address Display.

Parent topic: Wired Network Projection

Wireless Network Projection

You can send images to your PowerLite 1915/1925W projector through a wireless network. To do this,

you must install the Epson 802.11g/b/a wireless LAN module, and then set up your projector and

computer for wireless projection.

There are two ways to connect the projector to your wireless network:

• Using the optional Epson Quick Wireless USB Connection key.

• Configuring the connection manually using the projector's Network menus.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 197 198

Sin comentarios

Epson 1925W - POWERLITE Multimedia Projector Guía de usuario Pagina 54