Epson EB-Z8050W Guía de usuario Pagina 107

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 130
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 106
Prepare #2 plus-driver in advance.
Removing
Attention
Only remove the lens unit when necessary. If dust or dirt enter the
projector, projection quality deteriorates and it could cause a malfunction.
Try not to touch the lens section with your hand or fingers.
If fingerprints or oils are left on the surface of the lens, projection quality
deteriorates.
If the lens shift has been done, set the lens shift to the center before
replacing the lens unit.
Procedure
A
Remove the interface cover.
A
Loosen the fixing screw.
B
While pulling up the interface cover open switch, pull the interface cover
straight out.
B
Remove the front cover.
A
Loosen the two fixing screws.
B
Loosen the fixing screw.
C
Pull the cover straight out.
C
Pinch the lock lever of the lens unit and turn it
counterclockwise.
Removing and Attaching the Projector Lens Unit
107
Vista de pagina 106
1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 129 130

Comentarios a estos manuales

Sin comentarios