Epson LX-300+ Guía para resolver problemas Pagina 15
- Pagina / 16
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
EPSON LX-300+
5/00 EPSON LX-300+
-
15
Cleaning the Printer
To keep your printer operating at its best, you should clean it
thoroughly several times a year. Follow these steps:
1. Remove any paper loaded in the printer and turn it off.
2. Unplug the power cord from the electrical outlet; then
disconnect the interface cable from the printer.
3. Remove the paper guide. If a pull tractor or an optional cut-
sheet feeder is installed, remove it.
4. Use a soft brush to carefully brush away all dust and dirt
from the outer case and paper guide.
5. If the outer case or paper guide is still dirty, clean it with a
soft, clean cloth dampened with mild detergent dissolved in
water. Keep the printer cover in place and lower it until it
lies flat on top of the printer to prevent water from getting
inside the printer.
Never use alcohols or thinners to clean the printer;
these chemicals can damage the printer
components as well as the case.
Be careful not to get water on the printer mechanism
or electronic components.
Do not use a hard or abrasive brush.
Do not spray the inside of the printer with lubricants;
unsuitable lubricants can damage the printer
mechanism.
Transporting the Printer
If you need to transport your printer, carefully repack it using
the original box and packing materials, as described below.
You need to move the print head by hand to remove
the ribbon cartridge. If you have just used the printer,
the print head may be hot; let it cool for a few
minutes before touching it.
1. Remove any paper in the printer and turn it off.
2. Unplug the power cord from the electrical outlet; then
disconnect the interface cable from the printer.
3. Attach the paper guide.
4. If a pull tractor is installed, remove it. If any options are
installed, remove them and pack them in their original
boxes.
5. Make sure that the print head is not hot. Then remove the
ribbon cartridge.
6. Make sure the tractor that came with your printer is
installed in the push position.
7. Repack the printer, ribbon cartridge, and paper guide in the
original packing materials and place them in the printer’s
original box.
Related Documentation
4012023 EPSON LX-300+ User’s Guide
4012328 EPSON LX-300+ Read All About It
(Transition Guide)
TM-LX300+ EPSON LX-300+ Service Manual
PL-LX300+ EPSON LX-300+ Parts Price List
- EPSON LX-300+ 1
- User Replaceable Parts 1
- Options 1
- Printer Specifications 1
- Error Indicators 6
- Status Monitor 6
- Paper Positions 7
- Printing on Continuous Paper 7
- Printing on Single Sheets 11
- Printing on Special Paper 11
- Default Settings 13
- Printing a Hex Dump 14
- Bidirectional Alignment 14
- Printing a Self Test 14
- Cleaning the Printer 15
- Transporting the Printer 15
- Related Documentation 15
Relacionado con productos y manuales para Impresoras de matriz de puntos Epson LX-300+
(22 paginas)
(2 paginas)
(64 paginas)Philips MCD2160 Handbücher
Bedienungsanleitungen und Benutzerhandbücher für DVD Spieler Philips MCD2160.
Wir stellen PDF-Handbücher Philips MCD2160 zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung
Comentarios a estos manuales