
Commands 5-25
• When the LSB is 0, smoothing mode is turned off.
• When the LSB is 1, smoothing mode is turned on.
GS f
n
[Name] Select font for Human Readable Interpretation (HRI) characters
[Format] ASCII GS f
n
Hex 1D 66
n
Decimal 29 102
n
[Range]
n
= 0, 1, 48, 49
[Description] Selects a font for the HRI characters used when printing a bar code.
n
selects a font from the following table:
•
HRI indicates Human Readable Interpretation.
GS h
n
[Name] Set bar code height
[Format] ASCII GS h
n
Hex 1D 68
n
Decimal 29 104
n
[Range] 1 ≤
n
≤ 255
[Description] Sets the height of the bar code.
n
specifies the number of dots in the vertical direction.
➀ GS k
m
d1...dk
NUL
➁ GS k
m n
d1...dn
[Name] Print bar code
[Format]
➀ ASCII GS k
m d
1...d
k
NUL
Hex 1D 6B
m d
1...d
k
00
Decimal 29 107
m d
1...d
k
0
➁ ASCII GS k
m n
d
1...
dn
Hex 1D 6B
m n
d
1...
dn
Decimal 29 107
m n
d
1...
dn
[Range]
➀ 0 ≤
m
≤ 6 (
k
and
d
depends on the bar code system used)
➁ 65 ≤
m
≤ 73 (
n
and
d
depends on the bar code system used)
[Description] Selects a bar code system and prints the bar code.
n
Font
0, 48 Font A (12 × 24)
1, 49 Font B (9 × 24)
Comentarios a estos manuales