Epson C12C824052 (Internal Type-B 10/100Base-T High Speed Ethernet Print Server) Especificaciones Pagina 109

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 160
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 108
5-109
Maintaining and Transporting the Printer | 109
Replacing Ink Cartridges
Before you begin a large print job, you should check your ink levels. If one of
your cartridges is low, you can replace it before you start. Or you can wait
until the ink runs out, replace the cartridge, and then continue the job
without any loss of print quality. However, it is best to replace a low ink
cartridge before starting a large print job.
The easiest way to check ink levels is from the control panel:
When the red B ink light is flashing (and
INK LOW is displayed on the LCD
panel), the indicated cartridge is almost out of ink. Make sure you have a
replacement cartridge. When the light stays on and
INK OUT is displayed,
the cartridge is empty. You must replace the cartridge before you can
continue printing.
You can install any combination of 110 ml and 220 ml cartridges. It’s a good
idea to keep a set of empty 110 ml cartridges on hand at all times in case you
need to ship the printer.
Tip: You can store
partially used ink
cartridges for up to
6 months.
1 2 3 4 5 6 7 8
Menu
3sec.
1 Matte
Black/Photo
Black
2 Cyan
3 Magenta
4 Yellow
6 Light Cyan
8 Light
Light Black
7 Light Magenta
5 Light Black
Full
Empty
sp4800Guide.book Page 109 Tuesday, March 7, 2006 3:49 PM
Vista de pagina 108
1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 159 160

Comentarios a estos manuales

Sin comentarios