Epson C12C824052 (Internal Type-B 10/100Base-T High Speed Ethernet Print Server) Especificaciones descargar pdf (Pagina 123)

5-123

Solving Problems | 123

Solving Operational Problems

If you can’t turn the printer on, if it stops printing unexpectedly, or if

nothing prints, check the following:

• The printer is turned on.

• Paper is loaded in the printer.

• The printer is plugged securely into a working electrical outlet that’s not

controlled by a switch or timer.

• The interface cable is securely connected to the printer and your system.

• The voltage supplied by the electrical outlet matches the voltage on the

printer’s rating label. If not, turn off the power and unplug the power

cord immediately. Contact EPSON for assistance. (See page 11 for

details.)

If none of these suggestions help, try the solutions on the following page.

The bottom edge of

your print is smeared.

◗ The paper is curled toward the printable side. Flatten the paper or curl it toward the

other side.

◗ Make sure the Media Type setting in your printer software is correct for the media

you’re printing on.

◗ If you’re printing on non-EPSON media, you may need to adjust the paper thickness

setting or drying time. Use your printer software (page 51 for Mac OS X, page 67

for Mac OS 9, or page 86 for Windows) to choose the correct setting. When you’re

done printing with a custom paper configuration, be sure to return the setting to

standard (STD).

◗ If printing on thick paper, the platen gap setting may be incorrect. Use the control

panel to change the setting to WIDE or WIDER. See page 39 for instructions.

Problem Solution

sp4000Guide.book Page 123 Friday, October 22, 2004 5:06 PM

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 148 149

Sin comentarios

Epson C12C824052 (Internal Type-B 10/100Base-T High Speed Ethernet Print Server) Especificaciones Pagina 123