Epson F2000 Manual de usuario descargar pdf (Pagina 53)

Tips for Administrator 53

Product Security Policies

Start the product Remote Manager from your computer, open the Setup tab, and adjust

Security > IPsec/Access Control settings for security policies that match how the product

will be used.

Note:

We recommend that the product be assigned a static IP address for secure access using IPsec or

Access Control. Settings will be invalidated if the IP address changes.

Sample 1

Open the Setup tab in Remote Manager and configure Security > IPsec/Access Control

> Default Policy settings as follows:

Sample 2

Open the Setup tab in Remote Manager and configure Security > IPsec/Access Control

> Group Policy settings for each client.

Refusing Access from Unauthorized Clients

Open the Setup tab in Remote Manager and configure Security > IPsec/Access Control

> Default Policy settings as follows:

Print Client Settings

Separate IPsec/Access Control > Group Policy settings must be created for each of the

Service Name > RAW (Port 9100), ENPC,

and SNMP options as shown in the example

below. Group policies are applied in order from Group Policy 1.

Option Setting

IPsec/Access Control Enable

Default Policy > Access Control Use IPsec

Pre-Shared Key Enter a key (maximum 127

alphanumeric characters)

Option Setting

IPsec/Access Control Enable

Default Policy > Access Control Access Refuse

1 2 ... 48 49 50 51 52 53 54 55 56

Sin comentarios

Epson F2000 Manual de usuario Pagina 53