Epson C82324* Guía de usuario descargar pdf (Pagina 12)

Resetting (or Rebooting) the Ethernet Card causes it to reinitialize

and print a new configuration report. You can reset the

Ethernet Card in three ways:

Switching the Epson Ethernet Card for NetWare’s printer off

and back on again

Using EPSETUP (see Chapter 2)

Using EPCONFIG serial-number N=E RESET

(see Chapter 2)

How the Ethernet Card Works

Epson’s Ethernet Interface Card for NetWare operates in the

following Novell NetWare environments: 2.15c or later, or 3.x.

You can configure your Ethernet Card to print jobs in either of two

modes:

Print server mode (recommended)

QRemote printer mode

Using the Ethernet Card as a Print Server

In print server mode, the Ethernet Card performs all print server

functions. No VAP (Value Added Process) or NLM (NetWare

Loadable Module) is required. The network user sends a print

job from a workstation, the job is moved across the network to

the file server, and it is placed in a print queue. When the

printer is ready, the Ethernet Card print server moves the job

from the print queue to the printer.

Introduction 5

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 56 57

Sin comentarios

Epson C82324* Guía de usuario Pagina 12