Epson ActionPC 3000 Manual de usuario Pagina 89

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 131
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 88
4.
Reach behind the drive and gently push it to the front of the
bay; then pull it out of the slot.
5.
Once you have removed the drive, replace the faceplate by
inserting one side of the plate, then gently pressing on the
other side until it snaps into place.
6.
Replace the drive mounting bracket and reconnect the cables.
See page 4-8 for instructions.
Post-installation Procedures
After you install or remove your drive(s) and replace the cover
on your computer, you need to run the SETUP program to
define your new configuration. See Chapter 1 for instructions.
4-22 Installing and Removing Drives
Vista de pagina 88
1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 130 131

Comentarios a estos manuales

Sin comentarios