
PSB No: S-0147
Page: 4 of 9
Page Two
-
Video Card
VGA/EGA, CGA40, CGA80, MONO or not installed
-
800 X 600 Mode Refresh Rate
56/60 or 72 HZ.
-
1024 X 768 Mode refresh rate
Interlaced 44/88 HZ.
Non Interlaced 60 HZ. or 72 HZ.
Note that if you change this setting, you must reboot the computer in order
for the change to take effect.
-
Onboard Video Controller
primary/secondary
-
Keyboard
installed/not installed
-
Numlock On At Boot
no/yes
-
Password
installed/not installed
Page Three
-
Base Memory Above 512K
enabled/disabled
-
Base Memory
displays the size of base memory in KB. This size will differ from what you
set in Base Memory Above 512K only if there is a failure in base memory.
-
Extended Memory
displays the amount of memory in the system above 1 MB. The memory
includes SIMMS on the system board and memory on add-in boards. You
cannot change this setting through setup.
-
Speaker
enabled/disabled
-
Onboard Mouse
enabled/disabled
-
Parallel Port
disabled
Base Address 378H Compatible
Base Address 278H Compatible
Base Address 378H Bi-Directional
Base Address 278H Bi-Directional
Comentarios a estos manuales