Epson 2080 - LQ B/W Dot-matrix Printer Guía de usuario descargar pdf (Pagina 80)

Printing on Continuous Paper 2-39

R4C3730

Rev. B

A5 size CHAP2.FM

5/10/99 Pass 0

Proof Sign-off:

<Crestec> _______

<Kimura> _______

<Crestec> _______

To adjust the top-of-form position for continuous paper

loaded on the pull tractor, see the following example:

First mark a point 6.5 mm (0.26 in.) above the paper’s

perforation; then position the paper so that the mark is even

with the top edge of the plastic ribbon cover. This gives you

an 8.5 mm (0.33 in.) margin on the next page, meaning the

printer starts printing 8.5 mm (0.33 in.) below the perforation.

If you mark a point 5.5 mm (0.22 in.) above the perforation,

you get a 9.5 mm (0.37 in.) margin on the next page.

6. After you set the top-of-form position, press the Pause button

to exit micro adjust mode.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 227 228

Sin comentarios

Epson 2080 - LQ B/W Dot-matrix Printer Guía de usuario Pagina 80