Epson ActionPrinter-2000 Manual de usuario Pagina 89

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 127
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 88
Options
This section describes problems you may encounter while using an
option with your printer.
When you use the cut-sheet feeder, the paper does not feed
properly.
When a print command is sent from the computer, the
platen rotates but paper does not feed.
Make sure DIP switch
1-8 is set on. See the section on DIP
switches in Chapter
3.
The cut-sheet feeder may be incorrectly installed on the
printer.
See that the paper-release lever is pushed back to the
single-sheet position.
You may have loaded too many sheets in the cut-sheet
feeder’s bin.
Paper may be jammed near the print head.
There may be only one sheet left in the bin. Add more
paper.
Two or more sheets feed at one time.
You may have loaded too many sheets in the cut-sheet
feeder’s bin.
You may have forgotten to fan the stack of paper before
loading it into the bin. Remove the paper and fan it.
6-10
Troubleshooting
Vista de pagina 88
1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 126 127

Comentarios a estos manuales

Sin comentarios