
Document # 720000-0000
May 2008
3
EZ LOAD PRINTER
1.3 General specifications
Print Method
Direct Thermal
Resolution
8 dot/mm (203 dpi)
Print Width
80mm
Paper Width
80mm or 82.5 mm
Max Roll Diameter
EZLoad H/W rev 1: 115mm
EZLoad H/W rev 2: 125 mm
EZLoad Stretch:
152 mm
Operating Temperature
0° to 50° C
Storage Temperature
-40° C to 65° C
Operating Relative Humidity
5% to 90% RH at 50C (non-condensing)
Communication Interface Options
USB, optional :RS-232C, RS-485, IEEE1284
Memory/Firmware
PCB – non-DSP (100995-XXX): 1 Mbit SRAM, 4Mbit of
flash and 128kbit of EEPROM
PCB – DSP (206004-XXXXX):
64 MBit SDRAM, 16
MBit flash and 1 MBit EEPROM
Resident Character Sets
Support 32 fonts Approx.
(16 resident 16 user defined)
Integrated Bar Codes
UPC-A, UPC-E, interleaved 2 of 5, Code 39, Code 93,
Codabar, EAN 8, EAN 13, Code 128.
Note: Other Bar Codes can be programmed quickly
Speed
130 mm/s
Sensors
• Paper out
• Door open
• Cutter homed
• Paper low
• Jam Detect (optional)
Human Interface
Drop-in paper loading, status LED, paper feed button
Dimensions
(width x height x depth)
EZLoad H/W rev 1 & 2: 148mm x 255mm x 155mm
EZLoad Stretch
: 148mm x 315mm x 170mm
Weight
EZLoad H/W rev 1 & 2: 3.5 KG
EZLoad Stretch
: 4.5 KG
1.3.1.1 Immunity
EN 55024: 1998 + amendment A1: 2001 + amendment
A2: 2003
1.3.1.2 Emission Standards
United States – FCC 47 CFR Part 15, Subpart B
Canada – ICES-003 Issue 4 February 2004
Europe
– EN 55022: 1998
1.3.1.3 Safety
United States – UL60950-1 first edition 2003, includes
revisions through and including November 26, 2003
Canada
– CSA C22.2No. 60950-1-03, First edition 2003
Europe
– IEC 60950-1, first edition 2001
Table 1: Specifications
Comentarios a estos manuales