Epson LC-7211 Especificaciones descargar pdf (Pagina 44)

– 40 –

(1) Remove

• Rear case unit as described in section 2.

• Screw [1]

• Spring [2]

Set tension lever assy [3] in the unlocked posi-

tion.

• Two screws [4]

• Carriage motor unit [5]

Note:

When assembling the carriage motor assy, the

tension lever assy [3] must be secured with the

screw [1] when the spring [2] is in place.

(1) Remove

• Ribbon holder as described in section 3.

• Print head as described in section 8.

• Head cable [1]

• Ground spring [2]

• Stop ring [3]

• Adjusting gear [4]

• Adjusting bushings L, R [5] [6]

Adjusting bushings L/R can be removed by turn-

ing them.

• Carriage unit [7]

Center the carriage unit.

Note:

Move the carriage unit to the center position, then

align the “∆” mark of adjusting gear [4] with the

“∆” mark of adjusting lever [8].

10. Carriage Motor Assy

11. Carriage Unit

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 107 108

Sin comentarios

Epson LC-7211 Especificaciones Pagina 44