Epson R3000 Guía de inicio rápido descargar pdf

Caution: Don’t remove any

other seals or the cartridges

may leak.

4 Insert the cartridges in the holder for each color.

5 Press the cartridges down until they click.

6 Close the cartridge cover, then close the printer cover.

7 The printer begins priming the ink delivery system. This takes about

10 minutes. Do not turn off the printer, load paper, or open any covers

until the process is complete.

Caution: Don’t turn off the printer while it is priming or you’ll

waste ink.

Unpack

Caution: Do not open ink cartridge packages until you are ready to install

the ink. Cartridges are vacuum packed to maintain reliability.

1 Remove all protective materials.

2 Open the top cover and remove any tape inside.

3 Open the front cover and remove the transportation lock.

Tip: Keep the transportation lock in the accessories box. You can also use

the accessories box to store your printer manual and spare ink cartridges.

Turn on

1 Connect the power cable.

Caution: Do not connect to your computer yet.

2 Press the power button.

3 Select your language. (Press OK for English.)

To change the language, press or to select it, then press OK.

*412036900*

3 Load paper against the right edge and behind the tab. Then press the

button on the edge guide and slide it to the edge of the paper.

Note: Don’t load the paper sideways. Always load

it short edge ﬁ rst.

Front manual feed tray

You can print on these fine art media using the front

manual feed tray:

• Epson Velvet Fine Art Paper

• Epson Watercolor Paper Radiant White

• Epson UltraSmooth

Fine Art Paper

• Epson Exhibition Fiber Paper

• Epson Hot Press Bright

• Epson Hot Press Natural

• Epson Cold Press Bright

• Epson Cold Press Natural

• PremierArt™ Matte Scrapbook Photo Paper for Epson

Note: For instructions on loading roll paper, a CD or DVD, or thick media,

see the printed Basics guide.

1 Remove any paper from the sheet feeder.

2 Open the rear support.

3 Fully extend the rear support.

4 Open the front cover, then push the center of the manual feed tray to

extend it.

5 Insert a single sheet of fine art media. Insert it short end first with the

printable side face up.

4120369 Rev.0

1-F C

4120369 Rev.0

1-F M

4120369 Rev.0

1-F Y

4120369 Rev.0

1-F K

Start Here

Epson Stylus

Photo R3000

Read these instructions before using your product.

Load paper

Sheet feeder

You can load plain paper, and most glossy and matte papers, in the

sheet feeder.

1 Open the paper support and pull up the extensions.

2 Open the front cover, then extend the output tray.

Install ink cartridges

1 Open the printer cover, then open the ink cartridge cover.

2 Shake the ink cartridges gently 4 or 5 times, then unpack them.

3 Remove only the yellow tape from each cartridge.

1 2 3 4

Indice de contenidos

Pagina 1 - Start Here

Caution: Don’t remove any other seals or the cartridges may leak.4 Insert the cartridges in the holder for each color.5 Press the cartridges down

Pagina 2

Caution: Don’t remove any other seals or the cartridges may leak.4 Insert the cartridges in the holder for each color.5 Press the cartridges down

Pagina 3 - Any problems?

6 Feed the paper up to the line on the tray. Make sure the paper is flush against the right.7 Press the OK button. The paper loads inside the printer

Pagina 4

6 Feed the paper up to the line on the tray. Make sure the paper is flush against the right.7 Press the OK button. The paper loads inside the printer

Comentarios a estos manuales

Sin comentarios

Epson R3000 Guía de inicio rápido

Busca en linea o descarga Guía de inicio rápido para Impresión y escaneo Epson R3000. Epson R3000 Start Here Guide Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Impresión y escaneo Epson R3000