Epson Stylus Pro 10600 Print Engine with Archival Ink Guía de inicio rápido descargar pdf (Pagina 7)

Replacing Ink Cartridges (Continued)

3 Carefully pull the empty cartridge straight out of the

printer.

If ink gets on your hands, wash them

thoroughly with soap and water. If ink gets into

your eyes, flush them immediately with water.

If you can’t insert the cartridge smoothly, you

may have the wrong cartridge. Check the

package and product code.

6 Push the cartridge clamp back into the locked

position. Make sure the corresponding Ink Out light

goes off.

If the Ink Out light remains on, the cartridge

may not be installed correctly. Remove the

cartridge and then reinsert it as described

above.

7 Close the ink compartment cover.4 Make sure the replacement cartridge is the correct

color, and remove it from its package.

If you’re using Archival or UltraChrome ink, shake the

cartridge gently before installing it.

5 Hold the cartridge so the arrow mark is on the left

side and points to the rear of the printer. Then insert

the cartridge into the slot. Don’t force it.

SP10600 QRG 9/16/02, 05:11 PM7

1 2 3 4 5 6 7 8 9

Sin comentarios

Epson Stylus Pro 10600 Print Engine with Archival Ink Guía de inicio rápido Pagina 7