Epson Stylus Pro 4000 Print Engine Guía de inicio rápido descargar pdf (Pagina 1)

Loading Roll Paper

Slide the black paper stop off the end of

the spindle.

Note: To use paper with a 2-inch core, remove the

gray adapters from the paper stops at each end.

See your Printer Guide for details.

Position the roll as shown, then slide it onto

the spindle.

Slide the black paper stop back onto the spindle

and insert it firmly into the end of the roll.

Release the paper lever.

Hold both sides of the paper and feed it into

the slot.

Make sure the paper is aligned with the OTHER

mark and the vertical line next to the arrow. Then

return the paper lever to the secured position.

Open the roll paper cover.

Place the roll paper in the printer as shown. (The

gray end of the spindle goes on the right.)

Make sure the printer is turned on, then press the

Paper Source button until the or icon

appears.

Caution: To avoid feeding excess paper, make sure

you don’t select

when you’re using roll paper..

Raise the roll paper support on top of the

paper tray. Then close the roll paper cover.

Caution: To prevent creasing the paper, remove it

from the paper path and roll it up when you’re not

printing.

OTHER mark

Vertical line

1 2 3 4 5 6 7 8 9 10

Indice de contenidos

Pagina 1 - Loading Roll Paper

Loading Roll PaperLoading Roll Paper1Slide the black paper stop off the end ofthe spindle.Note: To use paper with a 2-inch core, remove thegray adapte

Pagina 2 - Loading Paper in the Tray

EPSON Stylus®Pro 4000Quick Reference GuidePrinted in USACPD-17010R1Control Panel Lights and ButtonsControl Panel Lights and Buttons1 2 3 4 5

Pagina 3 - Loading Paper Manually

25Load the sheets in the portrait orientation, shortedge first, with the printable side face down.Place the paper all the way back, against the rights

Pagina 4

33Open the top cover.4Insert the sheet face-up.The front manual feed slot provides a straight-throughpaper path for fine art paper, posterboard, or ot

Pagina 5 - Continue

Checking and Aligning the Print HeadChecking and Aligning the Print HeadIf your prints look grainy or blurry, or you seemisregistration or “ghosting,”

Pagina 6 - Replacing Printer Parts

5ContinueChecking Ink Levels and Replacing Ink CartridgesChecking Ink Levels and Replacing Ink CartridgesBefore you begin a large print job, you shoul

Pagina 7

Replacing Printer PartsReplacing Printer PartsReplacing Ink Cartridges (continued)Replacing Ink Cartridges (continued)5 Hold the cartridge with the ar

Pagina 8 - Control Panel Messages

Replacing Printer Parts (continued)Replacing Printer Parts (continued)5 Hold down the side pin, as shown, then turn thelatch to the right.6 Release th

Pagina 9 - Where To Get Help

Error messagesFor a complete list of error messages, see your Printer Guide.Control Panel MessagesControl Panel MessagesMessage Light Explanation or r

Pagina 10 - Pro 4000

Where To Get HelpWhere To Get HelpControl Panel Messages (continued)Control Panel Messages (continued)Error messages (continued)EPSON and EPSON Stylus