Epson EasyMP Multi PC Projection Guía de usuario Pagina 1

EasyMP Multi PC ProjectionOperation Guide

Note: The projection control screen may not be available on all versions of this software.Parent topic: EasyMP Multi PC Projection FeaturesRelated tas

Note: This function is available only for supported models.Parent topic: EasyMP Multi PC Projection FeaturesRelated tasksChanging the ModeratorRelated

Setting Up EasyMP Multi PC Projection for the First TimeFollow these instructions before connecting a computer to the projector over a network.Install

Requirement Windows MacOperating system Windows XP Mac OS X• Professional (32-bit) • 10.4.x (32-bit)• Home Edition (32-bit) • 10.5.1 or later (32-bit)

Requirement Windows MacDisplay Resolution between 1024 × 768 (XGA) and 1920 × 1200 (WUXGA)16-bit color or greater (approximately 32,000 display colors

Installation starts.5. Follow the on-screen instructions to install.Parent topic: Installing the SoftwareSetting Up the ProjectorFollow these instruct

7. Select On for Wireless LAN Power.8. Select Advanced for Connection Mode.9. Select other options as necessary for your network. See the User's

2. Connect the computer to the network.Note: To set up a network connection, if necessary, see the documentation supplied with yourcomputer or network

Connecting to the Projector and Projecting ImagesFollow these instructions to connect the computer and the projector over a network, and to projectima

• Only one user is the moderator and has full control over the meeting using the moderator function.(Holding a class or lesson using the participants&

Note: To start a meeting using the moderator function, one user must connect to the projector as themoderator and the other users must connect to the

1. Press the LAN button or Source Search button on the remote control to switch the input source toLAN.The LAN standby screen is projected.2. Start Ea

4. Select the projector you want to connect to from the Projector List, and then perform one of thefollowing operations.• All users can become present

The computer screen for the user who connects first is projected in full screen mode. Users who connectlater can project their own screen by clicking

Parent topic: Connecting to the Projector and Projecting ImagesSearch MethodsYou can use one of the following methods to search for the projector you

The search results are displayed.When you click Refresh, the latest information is displayed.If you cannot find any projectors, try one of the other s

1. Click Manual search on the search screen.2. Enter the IP address or the projector name for the projector you want to connect to, and then clickSear

The search results are displayed.Parent topic: Selecting the Projector Search MethodSearching for Network Projectors Using a ProfileYou can save netwo

1. Click Profile on the search screen.2. Double-click the folder or the projector icon for the profile you want to use from the list.28

The search results are displayed.Parent topic: Searching for Network Projectors Using a ProfileRelated tasksRegistering a ProfileRegistering a Profile

ContentsIntroduction to EasyMP Multi PC Projection... 7EasyM

2. Enter the Projector file name, and select the folder where you want to save the profile, and thenclick OK.The profile is registered and the project

Exporting a ProfileYou can export a profile and share it with other users allowing them to easily search for projectors andjoin a meeting.Note: You ca

Sharing a Profile over a NetworkYou can share an exported profile with other users over a network so that any changed projectorinformation is easily u

Parent topic: Searching for Network Projectors Using a ProfileRelated tasksExporting a ProfileControlling the Projected DisplayFollow these instructio

Parent topic: Controlling the Projected DisplayRelated referencesToolbarProjection Control ScreenOperating the Projected Display StatusYou can control

The projected image pauses. The paused image is projected, even if you make changes on thecomputer screen.Note:• These buttons are not available for p

2. Click the panel of the user to be projected in the projection area.The selected panel is framed in blue.3. Perform one of the following operations

• The background color for panels not being projected is gray.Parent topic: Controlling the Projected DisplayRelated referencesProjection Control Scre

Note:• If you cannot find the user that you want to project in the user list, you can search for them usingthe user search box.• You can also right-cl

2. Select the user in the projection area, and then drag and drop the user name into another position.The projection position is changed.Note: When th

Screen Types for Projection Control... 33Operating the Proj

The connection between your computer and the projectors is ended.Note:• When you are the moderator, the Disconnect All button is displayed on the tool

Note: This function is not available for participants when using the moderator function.The confirmation screen is displayed.2. Click OK.You are retur

Using Additional FunctionsFollow these instructions to use additional EasyMP Multi PC Projection functions that may be usefulduring a meeting.Searchin

Note:• You can start EasyMP Multi PC Projection by double-clicking the shortcut file (.pme). The savedprojectors are automatically searched for and th

A projector mirroring group is formed and the same image is projected from multiple projectors.Note:• When you select one projector from a projector m

3. Select Output audio from the projector, and then click OK.The Set options screen closes.Parent topic: Using Additional FunctionsRelated tasksProjec

Parent topic: Using Additional FunctionsChanging the ModeratorWhile using the moderator function, you can change the moderator when another user needs

4. Click OK.The moderator function turns off.5. Click the Become Moderator button on the projection control screen on a different user's computer

Note: This function is available only for the moderator when using the moderator function.1. Click Set options on the search screen.The Set options sc

Solving ProblemsSee the following sections to check for solutions to problems you may have using EasyMP Multi PCProjection.Solving Network Connection

Set options - User Settings ... 66Set options

• Set the computer, the access point, and the projector to the same SSID.Go to Network > Network Configuration > Wireless LAN > SSID.• Set DH

• If you cannot find the projector you want to connect to using Automatic search, select Manualsearch to specify the IP address.• Make sure the projec

• Set the IP address, the subnet mask, and the gateway address for the projector correctly.• Close network settings on the projector, and then return

Solutions When the Computer Screen is Not Displayed ProperlySolutions When the Screen is Not Projected ProperlySolutions When Audio is Not Played Prop

Related referencesSet options - General settingsSet options - Adjust performanceRelated tasksChanging the ModeratorSolutions When Audio is Not Played

Error Messages When Starting up EasyMP Multi PC ProjectionError Messages RemedyThis application is already running. Two instances of EasyMP Multi PC P

Error Messages RemedyNetwork adapter information could not be Check the following items.obtained.• A network adapter is installed on the computer.• Th

Error Messages When Searching for and Selecting ProjectorsError Messages RemedyCannot join. The maximum number of participants The maximum number of d

Installing EasyMP Multi PC Projection (Mac OS X)Related topicsSupported Resolutions and ColorsError Messages When ProjectingError Messages RemedyThe p

Error Messages RemedyCannot import. Format not supported by this Check the profile you want to import. You cannotapplication. import a profile for pro

Related tasksChanging the ModeratorEvent ID ListWhen a connection error occurs, a number indicating the type of error is displayed as follows.Event ID

Event ID Cause Remedy0898 Failed to acquire DHCP. Check the DHCP server to see if it isoperating correctly and check the LAN cableto see if it is conn

Screen SummarySee these sections for more information about the EasyMP Multi PC Projection screens.Search ScreenSave ScreenSet optionsToolbarProjectio

3 Manual search Searches for projectors on the network by specifying the projector'sIP address or projector name.4 Profile Searches for projector

14 Manual search box When using Manual search, enter the projector's IP address or theprojector name. Click the Search button to search for the s

Related tasksSearching for Network Projectors AutomaticallySearching for Network Projectors by Specifying an IP Address or Projector NameRelated topic

2 Save in Select the folder where you want to save the profile.3 Create New folder Creates a new folder.4 OK Registers the projector information in th

User name Enter the user name displayed in the user list on the projectioncontrol screen. You can enter up to 32 characters. This setting issynchroniz

Set options - General settingsWhen you click the General settings tab on the Set options screen, the following screen is displayed.Encrypt communicati

Use Easy Interactive Tools Select to use Easy Interactive Tools with EasyMP Multi PCProjection.This setting is synchronized with Transfer layered wind

Introduction to EasyMP Multi PC ProjectionSee the information here to learn more about EasyMP Multi PC Projection software.EasyMP Multi PC Projection

Performance adjustment slider You can set the performance to Fast, Normal, and Fine.Set to Fast if movie projections are interrupted.Lower the resolut

Output audio from the Select to output the computer's audio from the projector. Clear toprojector output audio from the computer.Note: You can on

When using the moderator function, one of the following toolbars is displayed depending on your role ofthe session.• For the moderator• For the partic

Pauses projected images while connecting to the projector.PauseProjects the screen from your computer in full screen mode without projecting anyother

Note: The projection control screen may not be available on all versions of this software.1 File menu Click to select Exit to close the software.Tool

5 User list Displays the user names for the computers connected to theprojectors. You can connect up to 50 devices between computers thatare running E

11 Screen control buttons Indicates the following status of the projector.Releases Stop or Pause and projects thecomputer screen as it is.ShowStops pr

Related referencesSearch ScreenSet options - User SettingsToolbarRelated tasksDisconnectingProjecting Your ScreenChanging the ModeratorHiding the Proj

AppendixSee these sections to learn more about EasyMP Multi PC Projection software.Updating and Uninstalling the SoftwareSupported Resolutions and Col

4. Do one of the following.• Windows XP: Double-click Add or Remove Programs.• Windows Vista and Windows 7: Click Uninstall a program from the Program

Parent topic: EasyMP Multi PC Projection FeaturesRelated tasksConnecting to Multiple Projectors (Mirroring)Related topicsConnection MethodsFour-Panel

Parent topic: Updating and Uninstalling the SoftwareSupported Resolutions and ColorsCheck these sections for the computer screen resolutions and the n

Windows Mac OS X16-bit color Approx. 32,000 colors (16-bit)32-bit color Approx. 16.7 million colors (32-bit)Parent topic: Supported Resolutions and Co

Parent topic: LimitationsLimitations when Projecting from Windows Photo Gallery or Windows Live PhotoGalleryNote the following limitations when launch

It is recommended that you select Keep the current color scheme, and don't show this messageagain. This selection is enabled until the computer i

Copyright NoticeAll rights reserved. No part of this publication may be reproduced, stored in a retrieval system, ortransmitted in any form or by any

In this guide, the operating systems above are referred to as "Mac OS X 10.4.x," "Mac OS X 10.5.x,""Mac OS X 10.6.x," &q

Parent topic: EasyMP Multi PC Projection FeaturesRelated tasksChanging the Number of Projected PanelsChange Presenters and Projection PositionUsing Ea