Epson TWAIN PRO Network Guía de usuario descargar pdf (Pagina 116)

Using Optional Equipment

109

Installing the Card in Your Scanner

Before you begin, turn off the scanner and disconnect the power cord and any cables.

1. Remove the two screws securing the shield

plate to the scanner’s optional interface

slot, and then remove the plate. Put the

screws in a safe place in case you want to

reinstall the shield plate later.

Static electricity can damage electronic components like the IEEE 1394

FireWire scanner interface card. To discharge static electricity, touch the

scanner’s metal frame before handling the card.

2. Turn the card over so that the

component side is facing down, and

insert it in the optional interface slot.

Push gently until the card is firmly

seated in the expansion slot inside the

optional interface slot.

3. Tighten the retaining screws and

reconnect the scanner’s cables.

Now you’re ready to connect the scanner to your computer. Continue with

“Connecting to an IEEE 1394 FireWire Interface” on page 21.

1680.book Page 109 Thursday, March 1, 2001 4:28 PM

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 158 159

Sin comentarios

Epson TWAIN PRO Network Guía de usuario Pagina 116