Epson TWAIN PRO Network Guia de preparacion descargar pdf (Pagina 25)

2-6

Setting Up the Scanner

Checking Initialization

Before connecting the scanner to your computer, follow the steps

below to make sure that the scanner initializes, or starts up,

properly.

1. Open the document cover so you can see the operation of the

scanner during initialization.

2. Turn on the scanner by pressing the

P operate button.

3. Make sure the fluorescent lamp on the carriage and the

READY light flash, and the carriage moves slightly.

4. When READY light stops flashing and stays on, it means the

scanner has completed initialization.

5. Turn off the scanner.

If the scanner does not work as described, make sure the power

cord is firmly plugged in and that you have released the

transportation lock, then try again.

Caution:

Whenever you turn off the scanner, wait at least10 secondsbefore

turning it back on. Rapidly turning the scanner on and off can

damage it.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 116 117

Sin comentarios

Epson TWAIN PRO Network Guia de preparacion Pagina 25