Epson 1705C - PowerLite XGA LCD Projector Guía de usuario descargar pdf (Pagina 48)

48 Presenting Through a Wireless Network

Starting EasyMP

Before connecting to the projector, you have to switch it to EasyMP

mode. Follow these steps:

1. Point the remote control at the projector and press the P

Power

button.

2. Press the

EasyMP button on the remote control to select EasyMP

as the source.

You see this screen. The network settings appear in the lower left.

3. If you’ve already set up your computer and projector for the mode

you want to use—Ad Hoc mode (also called computer-to-

computer mode) or Access Point mode (also called infrastructure

mode)—skip to “Projecting Over a Network” on page 73.

Otherwise, continue with the next section.

note

Use only the Epson

802.11g/b/a wireless module

in the projector.

If you see a message asking

you to insert a LAN or

memory card, check to make

sure your 802.11 g/b/a

module is properly inserted,

as described on the Quick

Setup sheet.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 197 198

Sin comentarios

Epson 1705C - PowerLite XGA LCD Projector Guía de usuario Pagina 48