Epson 1815p - PowerLite XGA LCD Projector Especificaciones Pagina 23
- Pagina / 26
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
PowerLite 1810p/1815p
3/08 PowerLite 1810p/1815p - 23
To select how often EMP Monitor checks the status of
projectors, follow the steps below:
1. From the Tool menu, select
Environment Setup. You see
this screen:
2. Enter the desired Update interval and click
OK.
Note: If you want EMP Monitor to run whenever you start your
computer, click
Register at startup.
Understanding the Notification Messages
If a projector experiences a problem, EMP Monitor sends an e-
mail message to each of the addresses you entered in the Set
mail notification function window. The subject line of the
message includes the projector’s display name, shown in EMP
Monitor, and the warning/error. The body of the message
contains the projector’s display name in EMP Monitor and the
error/warning message. When the problem has been fixed, EMP
Monitor sends a message indicating the problem has been
resolved.
Note: If a projector develops a critical problem, it may not be
possible for it to report the error.
Checking Projector Status
If your projector isn’t working correctly, first turn it off, wait for
it to cool (the
Power light stops flashing orange), and unplug it.
Then plug the power cord back in and turn on the projector. If
this doesn’t solve the problem, check the lights on top of the
projector.
What To Do When the Lights Flash
The lights on top of the projector indicate the projector’s status.
The following table describes the projector’s status lights.
Status lights
Light Status Description
Orange The projector is in sleep or standby
mode. You can unplug it or press the
P Power button to turn it on.
Flashing
green
The projector is warming up. Wait for the
image to appear.
Green The projector is operating normally.
Flashing
orange
The projector is cooling down. You can’t
turn it back on until the light stops
flashing and remains orange.
Red There is a problem with the projector.
Check the other two lights and the
information on this page to diagnose the
problem.
Flashing
orange
Rapid cooling is in progress. Although
this is not an abnormal condition,
projection will stop automatically if the
temperature rises higher. Make sure
there is plenty of space around and under
the projector for ventilation, and that the
air filter and vents are clear.
Temperature light
Lamp light
Power light
Relacionado con productos y manuales para Proyectores de datos Epson 1815p - PowerLite XGA LCD Projector
Proyectores de datos Epson EB-S18 Guía de usuario
(134 paginas)
(134 paginas)
Proyectores de datos Epson PowerLite S7 Guía de usuario
(110 paginas)
(110 paginas)
Proyectores de datos Epson PowerLite700c - PowerLite 700C XGA LCD Projector Especificaciones
(7 paginas)
(7 paginas)
Proyectores de datos Epson EB-G5350 Guía de usuario
(131 paginas)
(131 paginas)
Proyectores de datos Epson EMP-83H Guía de usuario
(78 paginas)
(78 paginas)
Proyectores de datos Epson EB-Z10000U Guía de usuario
(189 paginas)
(189 paginas)
Proyectores de datos Epson EMP 720 Guía de usuario
(76 paginas)
(76 paginas)
Proyectores de datos Epson PowerLite W16 Guía de usuario
(188 paginas)
(188 paginas)
Proyectores de datos Epson PA-295 Guía de usuario
(98 paginas)
(98 paginas)
Philips MCD2160 Handbücher
Bedienungsanleitungen und Benutzerhandbücher für DVD Spieler Philips MCD2160.
Wir stellen PDF-Handbücher Philips MCD2160 zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung
Comentarios a estos manuales