Epson 5550C - PowerLite SVGA LCD Projector Guía de usuario Pagina 145

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 178
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 144
5 • Maintenance
132
p
When transporting the projector, follow the packing guidelines
on page 137 to avoid damaging the delicate internal
components.
Warning:
Before you clean any part of the projector, turn it off and
unplug the power cord and any other cables that are attached.
Never open any cover on the projector, except the lamp and filter
covers. Dangerous electrical voltages in the projector can cause
severe injury. Don’t try to perform any servicing other than the
maintenance procedures explained in this chapter. Refer all other
servicing to qualified service personnel.
Cleaning the Lens
Clean the lens whenever you notice dirt or dust on the surface.
Lightly wipe the lens surface with a soft, dry, lint-free cloth. To
remove dirt or smears on the lens, moisten a soft cloth with an
alcohol-based cleaner and gently wipe the lens surface.
Cleaning the Projector Case
To clean the projector case, first unplug the power cord. To remove
dirt or dust, wipe the case with a soft, dry, lint-free cloth. To remove
stubborn dirt or stains, moisten a soft cloth with water and a mild
detergent. Then wipe the case.
Don’t use alcohol, benzene, thinner, or other chemical detergents.
These can cause the case to warp.
Vista de pagina 144
1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 177 178

Comentarios a estos manuales

Sin comentarios