Epson 5550C - PowerLite SVGA LCD Projector Guía de usuario Pagina 148

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 178
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 147
Replacing the Lamp
135
Warning:
Let the lamp cool before replacing it. Also, don’t touch
the glass portion of the lamp assembly; this can cause premature
lamp failure.
1. Turn off the projector and unplug the power cord from the
electrical outlet and the projector. Wait at least 20 minutes for
the bulb to cool.
2. Place the projector on its side with the handle at the top so you
can easily access the lamp cover.
Note:
Placing the projector in this position keeps dust from
getting inside the projector housing.
3. Use a screwdriver, coin, or similar object to loosen the retaining
screw on the lamp cover. When the screw is loose, lift off the
lamp cover. (You can’t remove this screw from the cover.
)
2
1
Vista de pagina 147
1 2 ... 143 144 145 146 147 148 149 150 151 152 153 ... 177 178

Comentarios a estos manuales

Sin comentarios