Epson ESC/VP21 Guía de usuario descargar pdf (Pagina 98)

Others menu

Submenu Function

SNMP

Set to On to monitor the projector using SNMP.

To monitor the projector, you need to install the SNMP manager

program on your computer. SNMP should be managed by a

network administrator.

The default value is Off.

Trap IP Address

1/Trap IP Ad‐

dress 2

You can register up to two IP addresses for the SNMP trap

notification destination. You can enter a number from 0 to 255 in

each field of the address. However, the following IP addresses

cannot be used. 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x

is a number from 0 to 255)

Priority Gateway

You can set the priority gateway to a Wired LAN or Wireless

LAN.

AMX Device Dis‐

covery

When the projector is connected to a network, set this to On to

allow the projector to be detected by

AMX Device Discovery

Set this to Off if you are not connected to an environment

controlled with a controller from AMX or AMX Device

Discovery.

Submenu Function

Crestron Room‐

View

Set this to On only when monitoring or controlling the projector

over the network using Crestron RoomView

. Otherwise, set

this to Off.

s "About Crestron RoomView

" p.75

When this is set to On, the following functions are not available.

• Web control

• Message Broadcasting (EasyMP Monitor plugin)

Bonjour

Set this to On when connecting to the network using Bonjour.

See Apple's Web site for more information on the Bonjour

service.

s http://www.apple.com/

Message Broad‐

casting

You can switch the EPSON Message Broadcasting function to

enable or disable.

List of Functions

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 148 149

Comentarios a estos manuales

Sin comentarios

Epson ESC/VP21 Guía de usuario Pagina 98

Comentarios a estos manuales

Relacionado con productos y manuales para Proyectores de datos Epson ESC/VP21