Epson G5000 - PowerLite XGA LCD Projector Guía de usuario Pagina 66

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 116
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 65
66 Managing Projectors
3. Press the
Menu button on the remote control, select the
Network menu, then press Enter. You see the following screen:
4. Choose
Wired LAN and press Enter.
5. Do one of the following:
If your network assigns addresses automatically, turn on the
DHCP setting.
If your network does not assign addresses automatically, turn
off
DHCP and enter the projector’s IP Address, Subnet
Mask, and Gateway Address.
To enter numbers, use the pointer button on the remote
control to highlight the number you want to input, then press
Enter.
6. When you’re done making all necessary changes, select
Return,
Setup complete, and then Yes to confirm that you want to save
the changes. Press
Menu to exit.
note
If you’re a network
administrator, you can use
the SNMP option to enter a
trap IP address. This lets you
receive trap alerts for the
p
rojectors you’re monitoring.
Vista de pagina 65
1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 115 116

Comentarios a estos manuales

Sin comentarios