Epson PowerLite 5000 Guía de usuario descargar pdf (Pagina 42)

Connecting to a Video Source

You can connect a VCR, a camcorder, a laser disc player, or any other

compatible video image source to your PowerLite 5000 projector.

The projector can receive composite video or S-Video. Your

equipment has composite video if your video source has a one-pin

RCA video jack. Your equipment has S-Video if your video source has

a four-pin video jack.

Note: The PowerLite 5OOO projector is not compatible with a cable

TV-style F connector.

You can connect the projector to both an S-Video and a composite

video source at the same time. However, the projector automatically

selects the S-Video as the video source. To display composite video,

first disconnect the S-Video source.

The projector supports NTSC, PAL, and SECAM video formats, and

automatically detects and identifies the video format. However, you

can specify that a single broadcast format be detected. (See Chapter 3.)

Note that the projector will then be able to detect only one type of

video signal.

Th t

ype of cable you use to connect the video source to the projector

depends on whether you have composite video or S-Video. For

composite video, use the audio/visual (A/V) cable supplied with the

projector. For S-Video, use the S-Video cable supplied with your video

device or obtain one from your computer dealer.

1 l Installation

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 119 120

Sin comentarios

Epson PowerLite 5000 Guía de usuario Pagina 42