Epson PowerLite 5000 Guía de usuario Pagina 43

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 120
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 42
To connect a video source to the projector:
1.
2.
3.
4.
Turn off the projector and video source if they are on.
If your video source uses a small, round, one-prong composite
(RCA) video connectors, you’ll need the audio/visual cable that
comes with the PowerLite 5000. If your video source uses a large,
round, four-prong S-video connector, you will need to purchase
an S-video cable.
For composite video, connect the yellow RCA plug on one end of
the audio/visual cable to the projector’s Video In jack. Connect
the other yellow RCA plug to the video-out jack of your video
source.
Connect the other plugs on the audio/visual cable to the Audio In
jacks of the projector: insert the white plug into the L Audio In
jack and the red plug into the R Audio In jack. Connect the plug
at the other end of the audio/visual cable to the audio output jacks
of the video source.
Connecting to a Computer
Vista de pagina 42
1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 119 120

Comentarios a estos manuales

Sin comentarios