Epson PowerLite X10+ Guía de usuario Pagina 37

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 129
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 36
Setting Up the Projector 37
Connecting a Component Video Source
If your video equipment has component video connectors (three
connectors labeled either Y/Cb/Cr or Y/Pb/Pr), you can purchase a
component-to-VGA video cable from an authorized Epson distributor
(see page 17) or an electronics dealer.
1. Connect the component end of the cable (3 male RCA) to the Y/
Cb/Cr (or Y/Pb/Pr) connectors on your device.
2. Connect the other end of the cable (HD15 male) to the
Computer (Component Video) port on your projector using an
optional component-to-VGA video cable or adapter.
3. You may need to change the
Input Signal setting in the
projector’s Signal menu to
Auto (see page 72).
PowerLite S10+
Computer (Component
Video) port
PowerLite X10+/PowerLite W10+
Computer (Component
Video) port
Vista de pagina 36
1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 128 129

Comentarios a estos manuales

Sin comentarios