Epson M119A Manual del operador descargar pdf (Pagina 12)

1–2 Setting Up the Printer

The printer should be installed so that it does not move or vibrate

during paper cutting or the drawer kick-out operation.

Fastening tape is available as an option.

Attaching the Paper Roll Near-End Detector (Option)

If you do not have a paper roll near-end detector or do not want to

attach it, skip this section.

Note:

If you use this detector, use paper rolls with a core diameter 10.5

to 12.5 mm (0.41 to 0.47”) so that the detector senses the

remaining paper correctly.

1. Make sure the power supply is disconnected from the printer.

2. Remove four screws from the bottom of the printer; then

remove the cover.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 54 55

Sin comentarios

Epson M119A Manual del operador Pagina 12