Epson TM U295 - B/W Dot-matrix Printer Manual del operador descargar pdf (Pagina 46)

5-6 Commands

n = 5: Slip paper status

Bit 3: Becomes Off (not waiting) just before actual slip selection takes place

after slip paper is detected

Bit 5 and 6: Transmits the current status of the TOF and BOF sensors.

[Reference] ESC u, ESC v, GS a

CAN

[Name] Cancel print data in page mode

[Format] ASCII CAN

Hex 18

Decimal 24

[Description] In page mode, deletes all the print data in the current printable area.

[Notes] • This command is enabled only in page mode.

• If data that existed in the previously specified printable area also

exists in the currently specified printable area, it is deleted.

[Reference] ESC W

ESC SP

[Name] Set right-side character spacing

[Format] ASCII ESC SP

Hex 1B 20

Decimal 27 32

[Range] 0 ≤

≤ 32

Bit Off/On Hex Decimal Function

0 Off 00 0 Not used. Fixed to Off.

1 On 02 2 Not used. Fixed to Off.

2 Off 00 0 Slip paper selected.

Off 00 0 Does not wait for slip paper insertion.

On 08 8 Waits for slip paper insertion.

4 On 10 16 Not used. Fixed to On.

Off 00 0 Slip is detected by the BOF sensor.

On 20 32 Slip is not detected by the BOF sensor.

Off 00 0 Slip is not detected by the TOF sensor.

On 40 64 Slip is detected by the TOF sensor.

7 Off 00 0 Not used. Fixed to Off.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 73 74

Sin comentarios

Epson TM U295 - B/W Dot-matrix Printer Manual del operador Pagina 46