Epson TM U295 - B/W Dot-matrix Printer Manual del operador descargar pdf (Pagina 49)

Commands 5-9

•

is the dot data for the characters. The dot pattern is in the

horizontal direction from the left side. Any remaining dots on

right side are blank.

• The data to define a user-defined character is (

) bytes.

• Set a corresponding bit to 1 to print a dot or to 0 to not print a dot.

• It is possible to define multiple characters for consecutive

character codes.

[Notes] • After user-defined characters are defined, they are available until

another definition is made; ESC @ is executed; the printer is reset;

or the power is turned off.

• If the values of

, or

are out of the specified range, the

printer ignores the command and processes the following data as

normal data.

•In 7 × 7 font, horizontally adjacent dots cannot be printed. Define

the character so that it does not include horizontally adjacent dots.

[Default] The internal character set

[Reference] ESC %

[Example]

•5 × 7 font when the dot pattern for code 32 (20H) is defined as shown below:

p1 p2 p3 p4 p5 p6

MSB

LSB

ASCII code ESC &

y c1 c2 x p1 p2 p3 p4 p5

Hex code 1B 26 01 20 20 05 3E 48 88 48 3E

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 73 74

Sin comentarios

Epson TM U295 - B/W Dot-matrix Printer Manual del operador Pagina 49