Epson U325PD - TM B/W Dot-matrix Printer Manual de usuario Pagina 7

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 10
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 6
Cash Drawer
Supported Devices:
(Any receipt printer interface drawer)
Setup:
1) Click on the Register menu item and then click on Register Center. If your Manager
Console was already open then click on the “Register(F2)” button.
2) Click on the Station Settings button. This will open the Station Detail window.
3) Click on the Cash Drawer tab.
4) Place a check next to “Use Cash Drawer”.
5) Enter in the correct control codes.
Epson and Samsung control codes:
Cash drawer trigger: 27,112,0,48
Partial cut (option): 27,105
Epson alternate cash drawer trigger: 27,112,0,64,240 (generates longer pulse)
Star control codes:
Cash drawer trigger: 7
Partial cut (option): 27,100,48 or 27,100,49
Citizen control codes:
Cash drawer trigger: 7
Partial cut (option): 27,80,00 or 27,80,01
(Some Citizen printers also use Epson control codes)
Ithaca POSjet control codes:
Cash drawer trigger: 27,120,1
Auto-cut (option): 27,118
Run Macro (for logo printing) <27><31><114>macro name<0> (Use only with POSjet
driver)
Note: If you have trouble printing, or can't make your cash drawer open, make sure your
printer port is set to EPP or Standard and not ECP. Many new computers, especially
Dell's, come from the factory with the printer ports set to ECP. This setting is not
compatible with most receipt printers. Contact your computer's manufacturer for
instructions on how to check the setting of your printer port.
6) Select the port that this printer is connected through.
7) To the right of where it says Cash Drawer Printer click on the “…” button.
8) Select the printer that the cash drawer is connected through and click OK. (If you do
not have this cash drawer connected through a printer then you will need to add a
generic/text only printer that uses the same port the cash drawer is connected through)
9) Click OK to save the changes.
Vista de pagina 6
1 2 3 4 5 6 7 8 9 10

Comentarios a estos manuales

Sin comentarios