Epson U325PD - TM B/W Dot-matrix Printer Manual de usuario descargar pdf (Pagina 8)

To test this device:

1) Click on the Register menu item and then click on Register Center. If your Manager

Console was already open then click on the “Register(F2)” button.

2) Click on the Station Settings button. This will open the Station Detail window.

3) Click on the Cash Drawer tab.

4) Press the test button and the cash drawer should open.

Pole Display

Supported Devices:

Logic Controls, Partner Tech

Setup:

1) Click on the Register menu item and then click on Register Center. If your Manager

Console was already open then click on the “Register(F2)” button.

2) Click on the Station Settings button. This will open the Station Detail window.

3) Click on Pole Display.

4) Place a check next to Use Pole Display.

5) To the right of where it says Pole ID click on the “…” button.

6) If you are using Partner Tech CD-5220 or CD-7220 then highlight 200 and press OK.

(Skip to step 11)

7) If you are using something else then highlight 251 and press edit.

8) Enter the name of the Pole Display as the description.

9) Enter control codes 1 and 2. (See your manufacturer’s instruction manual for details on

this).

10) Enter in the number of characters per line that will display on the pole display, click

OK, and click OK again to save changes.

11) Select the correct port that this devices uses.

12) Enter a “welcome to our store” message where it says Pole Line1 and Pole Line2.

13) To the right of where it says Pole Printer click on the “…” button.

14) Select the printer that the pole display is connected through and click OK. (If you do

not have this pole display connected through a printer then you will need to add a

generic/text only printer that uses the same port the pole display is connected through)

15) Click OK to save the changes.

To test this device:

1) Click on the Register menu item and then click on Register Center. If your Manager

Console was already open then click on the “Register(F2)” button.

2) Click on the Station Settings button. This will open the Station Detail window.

3) Click on Pole Display.

4) Click on the Test button and it should display the message from Pole Line1 and Pole

Line2 on your pole display.

1 2 3 4 5 6 7 8 9 10

Sin comentarios

Epson U325PD - TM B/W Dot-matrix Printer Manual de usuario Pagina 8