Epson U375P - TM B/W Dot-matrix Printer Manual de usuario descargar pdf (Pagina 30)

Setting the DIP Switches

Turn

off

the printer

while

removing the DIP switch cover

prevent

electrical short,

which

can damage the

printer.

You can change your interface and print column settings by changing

the

DIP switch settings.

1. Make sure the printer is turned off.

Remove the screw from the DIP switch cover. Then take off the DIP

switch cover, as shown in the illustration below.

There are two sets of switches. Notice that ON is marked on each set of

switches. Use tweezers or another narrow tool to move the switches.

Use the following tables to set the DIP switches. Numbers starting with

1 are in the first set, and numbers starting with 2 are in the second.

1-20

Setting Up the Printer

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 64 65

Sin comentarios

Epson U375P - TM B/W Dot-matrix Printer Manual de usuario Pagina 30