Epson S30670 Guia de preparacion Pagina 18

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 102
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 17
16 | Installing the Take-up Reel System
3. Connect the communication cord that is attached to the take-up reel system by running it through the
horizontal struts to the back of the printer. Place the cable in the cable supports and plug it in, making
sure to tighten the screws on the plug to secure it in place.
4. Connect the power cords to the printer and use the cable supports to restrain the cords as shown.
5. Plug the printer into outlets that are easily accessible. Note that two outlets are required, for a total of
20 amps. It is recommended that the outlets be powered by a dedicated 30-amp circuit.
Vista de pagina 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 101 102

Comentarios a estos manuales

Sin comentarios