Epson Multi-mode Data Controller MFJ-1278B Manual de usuario Pagina 179

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 406
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 178
MFJ-1278B MULTI-MODE OPERATIONAL COMMANDS
ANSWRQRA ON/OFF Mode: Packet Default: ON
Parameter:
ON MFJ-1278B responds to non-digipeated UI frames addressed to QRA, within 1 to
16 seconds, with an empty ID packet.
OFF Disables MFJ-1278B 's ping-response function.
QRA ("Who are you") pinging is supported by the MFJ-1278B. A QRA ping polls all of the
TNCs within range. A random number of seconds later, each TNC that heard the QRA ping
will transmit its identification packet. The purpose of this feature is to reveal to the
packeteer, particularly the transient one, the names of all reachable TNCs and digipeaters.
In order to send a QRA ping:
1. Set the unprotocol callsign to QRA
cmd: UNPROTO QRA<CR>
The MFJ-1278B will respond with whatever the UNPROTO command was set to previously.
2. Manually send an unconnected packet
cmd: CONVERSE<CR>
<CR>
^C
cmd:
This sequence will send an unconnected packet. Once the local TNCs have responded with
ID packets, then the user can press a "CRTL-C". The MFJ-1278B will respond with the
cmd: prompt.
ARCVCHAR nn Mode: RTTY/ASCII Default: $12
Parameter:
nn = 0 to 127, decimal or $00 to $7F, hexadecimal
The ARCVCHAR command specifies the character used in RTTY/ASCII/CW modes to
return to the receive mode after transmitting.
Vista de pagina 178
1 2 ... 174 175 176 177 178 179 180 181 182 183 184 ... 405 406

Comentarios a estos manuales

Sin comentarios