Epson Multi-mode Data Controller MFJ-1278B Manual de usuario descargar pdf (Pagina 268)

100

101

MFJ-1278B MULTI-MODE OPERATIONAL COMMANDS

RXBLOCK ON/OFF Mode: Packet Default: OFF

Parameters:

ON The MFJ-1278B will send data to the terminal in RXBLOCK format.

OFF The MFJ-1278B will send data to the terminal in standard format.

The RXBLOCK command is designed for automated operations, such as packet bulletin

board stations. It is intended to help such systems discriminate between data received from

the connected station and MFJ-1278-generated messages.

Correct operation of RXBLOCK is dependent on the AWLEN parameter getting set to 8

(bits) since the character FF hex marks the beginning of a received data unit header.

When RXBLOCK is ON, data from other stations will be sent from the MFJ-1278B in the

following format:

*$FF* L0.....L1 PID DATA

{ prefix } { length } { pid } { data }

The fields above are defined as follows:

prefix $FF A character with all 8 bits set

length L0 The high order length of the data, length, and pid fields logically ORed

with the value $F0

L1 The low order length of the data, length, and pid fields

pid PID The Protocol IDentifier byte received for the following data field

data DATA [Optional], variable length data

For best operation it is suggested that parameters like AUTOLF, MFILTER etc. be set OFF

in order to prevent uncertainties in the size of the data field.

1 2 ... 263 264 265 266 267 268 269 270 271 272 273 ... 405 406

Comentarios a estos manuales

Sin comentarios

Epson Multi-mode Data Controller MFJ-1278B Manual de usuario Pagina 268

Comentarios a estos manuales

Relacionado con productos y manuales para Accesorios De Computador Epson Multi-mode Data Controller MFJ-1278B