Epson LQ 670 - B/W Dot-matrix Printer Instrucciones de operaciones descargar pdf (Pagina 84)

Skip-over-perforation

This feature is available only when continuous paper is selected.

When you turn on this feature, the printer provides a one-inch

(25.4 mm) margin between the last line printed on one page and

the first line printed on the next page. Because most application

programs set their own top and bottom margins, you should use

this feature only if you cannot set your top and bottom margins

using your application.

Auto tear-off

When auto tear-off is on and you are using continuous paper

with the tractor, the printer automatically advances the paper

perforation to the tear-off position, where you can easily tear

off the printed page(s). When the printer receives data again, it

automatically moves the paper back to the top-of-form position

and starts printing, so you can use all of the next page.

When auto tear-off is turned off, you need to move the perforation

to the tear-off position manually by pressing the

Te a r O f f / Bi n

button. See “Using the tear-off function” in Chapter 3 for more

information.

Auto line feed

When auto line feed is on, the printer accompanies each carriage

return (CR) code received with a line feed (LF) code.

Print dire c tion

You can select auto print direction, bidirectional printing (Bi-d), or

unidirectional printing (Uni-d). Printing is normally bidirectional;

however, unidirectional printing allows for precise vertical

printing alignment.

Adonis Rev.C

A5 size Chapter 4

96/ 12/ 19 pass 5

Using the Control Panel

4-11

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 187 188

Sin comentarios

Epson LQ 670 - B/W Dot-matrix Printer Instrucciones de operaciones Pagina 84