Epson Stylus Pro 7000 Print Engine Guía de usuario descargar pdf (Pagina 110)

6-18

6-18 | Maintaining and Transporting the Printer

Replacing the Waste Ink System

Approximately every two years (or after 12000 A1-size prints), you must

have your authorized EPSON servicer replace the waste ink system. This is

necessary to prevent damage to the print head and maintain print quality.

Parts and labor for this service are not covered under the terms of the limited

warranty.

You can monitor the status of the waste ink system through the control

panel (see page 5-3) or through the Ink Pad number displayed on the nozzle

check print (see page 6-1).

The printer will display the following message on the control panel when the

waste ink system is almost full:

MAINTENANCE REQ. 0100

You should call to schedule service at this point. When the waste ink system

is at full capacity, the printer will stop and display the following message:

SERVICE REQ. 00000100

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 146 147

Sin comentarios

Epson Stylus Pro 7000 Print Engine Guía de usuario Pagina 110