Epson Stylus Pro 7000 Print Engine Guía de usuario descargar pdf (Pagina 19)

1-3

Connecting Your Printer and Installing Drivers | 1-3

3. Make sure you set any jumpers or DIP switches on the card. See the

card’s documentation for details.

On the FireWire card, make sure DIP switch 10 is set to

(advanced

mode).

4. Slide the interface card along the slots on both sides of the

compartment. Push it in firmly to fully insert the connector into the

printer’s internal socket.

5. Secure the interface card in the slot with the two screws included with

the card.

6. Make sure the printer has been turned off using the

Power

button.

Then plug in the power cord.

7. To initialize the EpsonNet Internal Print Server, turn on the printer

while holding down the status sheet button on the card for about 5

seconds.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 146 147

Sin comentarios

Epson Stylus Pro 7000 Print Engine Guía de usuario Pagina 19