Epson Stylus Pro 7000 Print Engine Guía de usuario Pagina 18

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 147
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 17
1-2
1-2 | Connecting Your Printer and Installing Drivers
Before you install the card, see the documentation that came with it for
setup information. Then follow these steps:
1. Make sure the printer is turned off and the power cord is unplugged.
2. Use a Phillips-head screwdriver to remove the two screws securing the
shield plate to the optional interface slot. Then lift off the plate.
Be sure to keep the screws so you can use them if you re-install the shield
plate.
Warning
To prevent electric shock
and avoid damaging the
printer, do not install an
interface card when the
printer is turned on or
connected to an electrical
outlet.
Vista de pagina 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 146 147

Comentarios a estos manuales

Sin comentarios