Epson Expression 636 Guía de usuario descargar pdf (Pagina 22)

Using the termination switch

The scanner has a built-in SCSI terminator. If the scanner is the

only SCSI device you connect to your computer or if it is the

last device in the daisy chain, leave the termination switch

turned on.

If the scanner is in the middle of a daisy chain, turn off the

termination switch.

Connecting the scanner to your computer or to another

SCSI device

To connect the scanner to a Macintosh, use a SCSI cable with a

25-pin connector on one end (for the computer) and a 50-pin

connector on the other end (for the scanner). To connect the

scanner to a PC or another SCSI device, use a SCSI cable with

50-pin connectors on both ends. Connect the scanner as

follows:

Make sure that the scanner, the computer, and all other SCSI

devices are turned off and unplugged from the power

source.

1-10

Setting Up the Scanner

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 74 75

Sin comentarios

Epson Expression 636 Guía de usuario Pagina 22