Epson Expression 636 Guía de usuario Pagina 68

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 75
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 67
Initialization
The scanner can be initialized (returned to a fixed set of conditions) in the
following ways:
Hardware initialization
* The scanner is turned on.
* The scanner receives an INIT signal from the
parallel interface: pin 31 goes LOW.
* The scanner receives a SCSI Reset signal
from the SCSI interface.
Software initialization
* Software sends the ESC @ (initialize the
scanner) command.
* The scanner receives a SCSI Bus Device
Message,
Appendix A-7
Vista de pagina 67
1 2 ... 63 64 65 66 67 68 69 70 71 72 73 74 75

Comentarios a estos manuales

Sin comentarios