Epson Expression 636 Guía de usuario descargar pdf (Pagina 38)

Note:

Before transporting the scanner, you need to remove the transparency

unit and reattach its shipping screw. You can attach the shipping

screw only when the transparency unit’s lamp assembly is in its home

position. To move it to its home position when the transparency unit

is attached to the scanner, close the transparency unit, turn on the

scanner, and then turn it off.

Installing the transparency unit

Follow the steps below to install the transparency unit on the

scanner.

Note:

You cannot have the automatic document feeder and the transparency

unit installed on the scanner at the same time.

Make sure the scanner is turned off, and unplug the

scanner’s power cable.

Remove the scanner’s document cover by holding the cover

behind the hinge and lifting the back of the cover straight

up as shown on page 2-6.

3-4 Options

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 74 75

Sin comentarios

Epson Expression 636 Guía de usuario Pagina 38