Epson Apex+ Manual de usuario descargar pdf (Pagina 36)

You can enter the correct date or leave it unchanged by

pressing Enter. For now, press Enter to leave the date

unchanged.

6. After accepting the date, MS-DOS displays the time

prompt:

Current time is hh:mm:ss

Enter new time:

You can enter the correct time or bypass the prompt by

pressing Enter. For now, press Enter to bypass the prompt.

The system now displays the MS-DOS command prompt,

A>, which is your starting point for putting MS-DOS to

work.

The command prompt

The command prompt tells you that MS-DOS is loaded and

your computer is ready to receive instructions. The command

prompt also identifies the current operating drive: A, B, or C.

It displays on the screen when you load MS-DOS, complete an

MS-DOS command, or return to MS-DOS from an application

program. If your current operating drive is A, it looks like this:

On the Apex Plus system, the top drive is drive A and the

bottom drive is drive B. On the Apex Plus 20 system, the

diskette drive is drive A and the hard disk drive is drive C.

MS-DOS reserves the label B for a second diskette drive,

whether or not it is installed.

If you are using an Apex Plus 20 and you booted from the hard

disk; you’ll notice that your prompt is not the MS-DOS default

command prompt

c>.

Instead, your prompt looks like this:

c:\ >

Setting Up Your System 1-21

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 157 158

Sin comentarios

Epson Apex+ Manual de usuario Pagina 36