Epson Apex+ Manual de usuario Pagina 39

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 158
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 38
7.
Press N to return to the MS-DOS command prompt.
8. Store the original system diskettes in a safe place.
9. Properly label the working copies you just created.
Copying diskettes on the Apex Plus 20
1.
The C> prompt should be displayed on the screen. If it is
not, type
C
:
and press
Enter.
2. Type:
DISKCOPY
and press Enter. The screen displays the following prompts:
Insert SOURCE diskette in drive A:
Press any key when ready...
3.
Insert the MS-DOS system diskette (the source) into drive
A and turn the diskette drive latch to lock the diskette in
place. Then press any key.
The DISKCOPY program copies the contents of the
diskette to the computer’s memory and then displays these
prompts:
Insert TARGET diskette in drive A:
Press any key when ready...
4.
Release the disk latch and remove the MS-DOS system
diskette from drive A.
5.
Insert the blank diskette (the target) in the drive and turn
the diskette drive latch to lock the diskette in place. Then
press any key.
1-24 Setting Up Your System
Vista de pagina 38
1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 157 158

Comentarios a estos manuales

Sin comentarios