Epson AL-M200 Series Guía de usuario Pagina 149

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 232
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 148
InternetServices Disable
Disables an access to EpsonNet Config embedded in the printer.
Enable
*1
Enables an access to EpsonNet Config embedded in the printer.
Bonjour(mDNS) Disable
Disables the Bonjour (mDNS).
Enable
*1
Enables the Bonjour (mDNS).
*1
Factory default menu setting
*2
WSD stands for Web Services on Devices.
IP Filter
Note:
The IP Filter feature is available only when Protocol is set to LPD or Port 9100.
Purpose:
To block data received from certain IP addresses through the network. You can set up to five IP
addresses. To make any changes effective, turn off the printer and then turn it back on.
Values:
No.n/Address (n is 1 - 5.)
Sets the IP address for Filter n.
No.n/Mask (n is 1 - 5.)
Sets the address mask for Filter n.
No.n/Mode (n is 1 -
5.)
Off
*
Disables the IP Filter feature for Filter n.
Reject
Rejects an access from the specified IP address.
Accept
Accepts an access from the specified IP address.
*
Factory default menu setting
Initialize NVM
Purpose:
To initialize wired network data stored in Non-Volatile Memory (NVM). Enabling this feature and
rebooting the printer will reset all the wired network settings to their factory default values.
Values:
Yes
Initializes the wired network data stored in NVM.
No
*
Does not initialize the wired network data stored in NVM.
*
Factory default menu setting
AL-M200 Series User’s Guide
Using the Operator Panel Menus 149
Vista de pagina 148
1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 231 232

Comentarios a estos manuales

Sin comentarios