Epson AL-M200 Series Guía de usuario descargar pdf (Pagina 205)

Enabling the Non Genuine Toner Mode

When toner within the toner cartridge is empty, the Replace Toner Cartridge message appears.

When you want to use the printer in the Non Genuine Toner mode, enable the Non Genuine Toner

mode and replace the toner cartridge.

Important:

If you use the printer in the Non Genuine Toner mode, the performance of the printer may not be at its

optimum. And any problems that may arise from the use of the Non Genuine Toner mode are not

covered by our quality guarantee. The continuous use of the Non Genuine Toner mode can also cause the

printer to break down, and any repair charges for such break down will be incurred by users.

Note:

To disable the Non Genuine Toner mode, select Off for Toner of Non Genuine Toner on the operator

panel or clear the check box next to On on the Non Genuine Toner page of the Printer Maintenance tab

of the Printer Setting Utility.

Using the Operator Panel

Note:

Before starting the operation described below, confirm that the LCD panel shows Ready to Print.

1. Press the

(Menu) button.

2. Select Admin Menu and then press the

button.

3. Select Maintenance and then press the

button.

4. Select Non Genuine Toner and then press the

button.

5. Select Toner and then press the

button.

6. Select On and then press the

button.

7. Press the

button until the top page is displayed.

The printer switches to the Non Genuine Toner mode.

AL-M200 Series User’s Guide

Troubleshooting 205

1 2 ... 200 201 202 203 204 205 206 207 208 209 210 ... 231 232

Sin comentarios

Epson AL-M200 Series Guía de usuario Pagina 205